ECS G11 Intel Matrix Storage driver for Windows 7 - Intel drivers for Windows 7

ECS G11 Intel Matrix Storage 11.1.0.1006

Download Other drivers drivers from Intel for Windows 7

ECS G11 Intel Matrix Storage driver from INTEL for Windows XP / Windows Vista / Windows XP 64 bit / Windows Vista 64 bit / Windows 7 / Windows 7 64 bit

Publisher review for ECS G11 Intel Matrix Storage 11.1.0.1006:

Before install ECS G11 Intel Matrix Storage 11.1.0.1006you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of ECS G11 Intel Matrix Storage. We recommend to always use most recent version of a driver.

Fixes:
- RaidCfg64 tool doesn't return the correct string about the model name
- RAIDCFG32/64 "/std" command does not show full device name
- When HDDs serial number is over 16 characters, RAIDCFG64.exe will fail on accelerate enable.
- RST does not correctly safely remove disks with formatted partitions
- User Interface Help does not notify the user how to increase partition/Volume size after a migration
- Enabling Acceleration of a RAID Volume Does Not Disable the Volume's Write Back Cache
- Revert changes to support Acceleration after hot-unplug and re-insert of SSD
- BSOD 0xD5 sporadically seen during hot plug test
- 'Create' tab appears in the user interface when a cache volume is created by RcfgSata.exe or Raidcfg32/64.exe, when it should not
- SRT Caching thrashes cache contents running a specific test
- 0x50/0x7E BSOD occurs during Write Test
- RST copyright corrected to be 2012
- When a data volume is set to 8GB on a 32GB SSD HDD, SRT does not use the remaining space on the SSD
- ODD tray eject by PowerDVD take ~10sec when ODD is in Zero Power state
- 0x7E BSOD observed when running extended S3 cycles
- RST not properly reporting HDD SMART information by IOCTL(SMART_RCV_DRIVE_DATA)
- RAID Error and Warning Event IDs are set to Zero
- Setting for adaptive spindown causing noticeable delays on HDD spin up



Operating system:
Windows XP / Windows Vista / Windows XP 64 bit / Windows Vista 64 bit / Windows 7 / Windows 7 64 bit