EVGA Z170 FTW driver for Windows 7 - EVGA Z170 FTW driver from EVGA for Windows 7, Win

EVGA Z170 FTW 1.08

EVGA Z170 FTW driver from EVGA for Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 b

EVGA Z170 FTW driver from EVGA for Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, OS Independent, Windows 8.1, Windows 8.1 64 bit, Windows 10, Windows 10 64 bit

Publisher review for EVGA Z170 FTW 1.08:

Before install EVGA Z170 FTW 1.08you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of EVGA Z170 FTW . We recommend to always use most recent version of a driver.

Changes: - Improving NVMe device compatibility
- Add secure boot support
- Fix event ID 12 issue after S3 resume
- Various smaller issues fixed
Windows Installation: - Download the .zip file.
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
BIOS Installation: - Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.

Operating system:
Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, OS Independent, Windows 8.1, Windows 8.1 64 bit, Windows 10, Windows 10 64 bit