Extron MLS 406MA Switcher driver for Windows 7 - Extron MLS 406MA Switcher driver from Extron for

Extron MLS 406MA Switcher 1.06

Extron MLS 406MA Switcher driver from Extron for OS Independent

Extron MLS 406MA Switcher driver from Extron for OS Independent

Publisher review for Extron MLS 406MA Switcher 1.06:

Before install Extron MLS 406MA Switcher 1.06you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron MLS 406MA Switcher . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron MLS 406MA Switcher Firmware 1.06.Fixes:- Fixed Issue (originated in v1.05) – No Mono audio output – Stereo audio is heard when the mono audio feature is selected via software or SIS command.
Installation steps:1. Download the firmware file.
2. Connect a cable between the RS-232/MLC/IR port of the MLS and the serial (RS-232) port of the PC (see Control connection on pages 2-7 and 2-8), and power on the MLS.
3. Start the MediaLink Control program.
4. From the File pulldown menu in the upper-left corner, select Update Firmware. The MediaLink Control Software closes, and a separate utility program opens and displays a window indicating the current firmware version.
5. Click Upload Firmware file. You are prompted to select the firmware file that you downloaded in step 1. Click OK.
6. When the browser window opens, locate and select the firmware file, then click Open to upload the firmware into the MLS. The firmware update file must have a filename extension of .s19. If the file does not have that extension, it will not work properly.
7. Follow the on-screen instructions.
8. When the firmware uploading is complete, a dialog box appears and asks you:
- to exit the firmware update utility program if the new firmware loaded correctly (if the correct firmware version is displayed in the program window)
- to run the utility again (perform step 5 of this procedure) if the firmware did not load correctly. Follow the on-screen directions to complete the process

Operating system:
OS Independent