Extron MMX 42 AV Matrix Switcher driver for Windows 7 - Extron MMX 42 AV Matrix Switcher driver from Extr

Extron MMX 42 AV Matrix Switcher 1.02

Extron MMX 42 AV Matrix Switcher driver from Extron for OS Independent

Extron MMX 42 AV Matrix Switcher driver from Extron for OS Independent

Publisher review for Extron MMX 42 AV Matrix Switcher 1.02:

Before install Extron MMX 42 AV Matrix Switcher 1.02you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron MMX 42 AV Matrix Switcher . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron MMX 42 AV Matrix Switcher Firmware version 1.02.New features/ Fixes:- Minimized the power up audio level correction when input 1 is tied to output 1(MMX 42 AV and MMX 42 SVA). If audio input 1 is tied to audio output 1 at power up, a short burst of audio may be heard from output 1 before the completion of the units power up sequence. Firmware revision 1.02 corrects this issue for MMX 42 models.
- Corrected back to back command string issue. When sending back to back tie commands: Follow-all (!) first, and then audio breakaway ($) second (1*1!1*2$), the audio command (1*2$) will execute, but the follow all command (1*1!) was not executed unless the front panel buttons were pressed. Firmware revision 1.02 corrects this issue. Commands with the follow-all command at the end of the string will execute properly (1*2$1*1!), regardless of the order of commands in the string.
- MMX Series matrix switchers are now compatible with the MKP 2000 and MKP 3000 X-Y Remote Control Panels. Functions are limited to making ties (follow-all and breakaway) and viewing video ties only.
Installation steps:1. Download the firmware file.
2. In the Universal Switcher Control Program, click the tool bar's Firmware Loader button .
3. If you have not previously updated firmware for the MMX switcher before, on the Add Device screen, select the RS-232 tab. If you have previously updated firmware for this model, click Cancel. The Firmware Loader window appears.Proceed to step 6.
4. From the drop-down menus on the RS-232 screen, select the appropriate Com port number and baud rate (the default is 9600).
5. Click OK. The Firmware Loader window appears.
6. Select the MMX and click File > Open. The Choose Firmware File screen appears.
7. Navigate to and select the new firmware file. Click Open. The Choose Firmware File window closes. The firmware file must have a .s19 extension. Other file types can cause the switcher to stop functioning.
8. In the Firmware Loader window, click Begin. The Total Progress and Progress status bars how the progress of the upload. The firmware upload to the switcher may take several minutes. Once the status bars have progressed from 0% to 100%, and Status is listed as Complete, the firmware loader utility resets the switcher.
9. Click Exit to close the Firmware Loader.

Operating system:
OS Independent