Extron TLI Pro 101 Touchpanel Interface driver for Windows 7 - Extron TLI Pro 101 Touchpanel Interface driver fr

Extron TLI Pro 101 Touchpanel Interface 2.00.0001-b012

Extron TLI Pro 101 Touchpanel Interface driver from Extron for OS Independent

Extron TLI Pro 101 Touchpanel Interface driver from Extron for OS Independent

Publisher review for Extron TLI Pro 101 Touchpanel Interface 2.00.0001-b012:

Before install Extron TLI Pro 101 Touchpanel Interface 2.00.0001-b012you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron TLI Pro 101 Touchpanel Interface . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron TLI Pro 101 Touchpanel Interface Firmware 2.00.0001-b012. Fixes:- Added Feature - Add support for GCP 2.0.0 systems – Configurations created by Global Configurator 2.0.0 are now supported.
NOTE - This version of firmware breaks backward compatibility. See compatibility chart for details.
- Added Feature – Add support for Custom SSL Certificates – Custom SSL certificates are now supported.
- Added Feature – Additional support for touch displays – The following touch displays have been added to the firmware: Dell S220T/ Sharp LL-S201A/ Qomo QIT600F1/ PQ Labs G5
- Fixed Issue (originated in v1.02.0001-b001) – Popup priority is not preserved when flipping pages – The selected popup page may not be preserved on a page when flipping to and from the page with popups. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Video glitching when switching between sources – Glitching has been reduced when switching between various video sources. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Video signal does not fill the video window – Video signals failed to scale up to fit the size of the video window. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Sleep timer expired prematurely – In certain instances, the display may turn off before the sleep timer expires. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Display flickers when showing popups – If a video window is active, the entire display may flicker when hiding or showing a popup. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Buttons are hidden behind video window – Buttons may not appear to be hidden behind a video window if there are multiple video windows visible at the same time. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Unable to save password changes – Passwords when set from Toolbelt were not saving. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Displaying a Video Preview Window above a Popup will Display Unwanted Objects – This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Unsupported audio rates in EDID – The product only supports 2Ch 48 kHz audio. All other audio rates were removed from the EDID. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Video content not displayed after unit has been power cycled – Video window may appear blank after the unit is power cycled. Video content will reappear if pages are flipped or the unit enters and exits the setup menu. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Audio playback tempo is too fast – Audio files were playing at a faster speed than the original source file. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Audio heard when video window in not active – Audio may be heard when changing HDMI or XTP input volume while the video window is not active. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – TLP Pro 1220MG calibration is off after factory reset – Performing a factory reset will cause the calibration on the screen to be incorrect. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – HDCP video content not appearing on certain DVI displays – HDCP content was not passing to certain DVI displays. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – "TBD" appears in Connected Display EDID information – Certain displays connected to the TLI Pro 101 will report “TBD” for EDID video and audio formats. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Incorrect network status on TLP Pro 1520TG – Link status on the LAN port LEDs and on the Status page of the setup menu does not report back the correct status when the touchpanel is offline. The Communication LED does report correctly if enabled. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Unable to save input audio setting on TLI Pro 101 – When disabling the input audio from the setup menu it will not save the setting. This issue has been resolved in version 2.00.0001-b012.
- Fixed Issue (originated in v1.02.0001-b001) – Incorrect input resolution status – Input resolution status may be incorrect when the Overscan setting is used. If the input signal changed while the unit is in the setup menu, the input signal status would not update. This issue has been resolved in version 2.00.0001-b012
Installation steps:1. If you have not already done so, download the firmware file to a computer on the same
network as the touchpanel.
2. Open the TLI Pro 101 web page.
3. Click Browse and navigate to the firmware location.
4. Click Upload . The firmware file is uploaded to the touchpanel. Follow the on-screen instructions.

Operating system:
OS Independent