Gigabyte GA-B75TN (rev. 1.0) Intel Graphics driver for Windows 7 - Intel drivers for Windows 7

Gigabyte GA-B75TN (rev. 1.0) Intel Graphics 15.28.8.2867

Download Display and Video drivers from Intel for Windows 7

Gigabyte GA-B75TN (rev. 1.0) Intel Graphics driver from INTEL for Windows 7 / Windows 8

Publisher review for Gigabyte GA-B75TN (rev. 1.0) Intel Graphics 15.28.8.2867:

Before install Gigabyte GA-B75TN (rev. 1.0) Intel Graphics 15.28.8.2867you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Gigabyte GA-B75TN (rev. 1.0) Intel Graphics. We recommend to always use most recent version of a driver.

Specifications:

- CPU
Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package (Supports up to 77W)
L3 cache varies with CPU

- Chipset
Intel B75 Express Chipset

- Memory
2 x 1.5V DDR3 SO-DIMM sockets supporting up to 8 GB of system memory
Dual channel memory architecture
Support for DDR3 1600/1333/1066/800 MHz memory modules

- Onboard Graphics
Integrated Graphics Processor:
1 x HDMI 1.3 port, supporting a maximum resolution of 1920x1200
1 x DisplayPort, supporting a maximum resolution of 2560x1600
1 x LVDS connector

- Audio
Realtek ALC887 codec
High Definition Audio
2/4/5.1/7.1-channel
To configure 5.1/7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

- LAN
1 x Realtek GbE LAN chip (10/100/1000 Mbit)

- Expansion Slots
1 x PCI Express x4 slot (Supports 25W only)
(The PCIEX4 slot conforms to PCI Express 3.0 standard.)
1 x Mini PCI Express x1 slot

- Storage Interface
Chipset:
1 x SATA 6Gb/s connector (SATA0) supporting up to 1 SATA 6Gb/s device
3 x SATA 3Gb/s connectors (SATA1/2/3) supporting up to 3 SATA 3Gb/s devices
1 x mSATA connector

- USB
Chipset:
Up to 4 USB 3.0/2.0 ports on the back panel
Up to 5 USB 2.0/1.1 ports available through the internal USB headers (Card reader/Touch panel/webcam and other devices)

- Internal I/O Connectors
1 x 2-pin power connector
1 x CPU fan header
1 x system fan header
1 x SATA 6Gb/s connector
3 x SATA 3Gb/s connectors
1 x mSATA connector
1 x SATA power connector
5 x USB 2.0/1.1 headers
1 x front panel header
1 x front panel audio header
1 x digital microphone header
1 x AIO speaker header
1 x LVDS connector
1 x LVDS drive voltage header
1 x flat panel display power header (both panel and backlight inverter)
1 x flat panel display power connector
1 x backlight switch header
1 x flat panel display switch header
1 x WIFI activity indicator LED header
1 x Clear CMOS jumper

- Back Panel Connectors
1 x HDMI port
1 x DisplayPort
4 x USB 3.0/2.0 ports
1 x RJ-45 port
2 x audio jacks (Line Out, Mic In)
1 x DC-In power connector

- I/O Controller
iTE I/O Controller Chip

- H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU fan speed control
For 4-pin CPU coolers only.
Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.

- BIOS
1 x 64 Mbit flash
Use of licensed AMI EFI BIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a



Operating system:
Windows 7 / Windows 8