Intel ESRT2 RAID driver for Windows 7 - Intel ESRT2 RAID driver from Intel for OS Indepen

Intel ESRT2 RAID 17.01.2016.0216

Intel ESRT2 RAID driver from Intel for OS Independent

Intel ESRT2 RAID driver from Intel for OS Independent

Publisher review for Intel ESRT2 RAID 17.01.2016.0216:

Before install Intel ESRT2 RAID 17.01.2016.0216you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Intel ESRT2 RAID . We recommend to always use most recent version of a driver.

This download provides support for Intel HM87, C232, C236, and C600 chipsets on both AHCI Capable SATA Controller and SATA/SAS Capable Controller in Intel Embedded Server RAID Technology 2 (ESRT2) mode.

This driver is not compatible for use with the legacy Intel Embedded Server RAID Technology 2 RAID adapter products Intel RAID Controller SASMF8I and Intel RAID SAS Controller AXX4SASMOD. These are not AHCI-based controllers. Defects Fixed:- (Resolved) - Restore fault LED state after wake up from sleep in Linux
- (Closed) - MSM on SWR Reading Temperature of 0C for SATA SSDs and HDDs
- (Resolved) - Creating a VD from an offline DG from SWRAID is allowed
- (Resolved) - Win10 WHQL TEST SCSI_COMPLAINCE TEST 2.0 failure on SWr
- (Closed) - MegaSR: IO Program fails with Data Compare Error on drive E.
- (Resolved) - 4K Vd created in uEFI version 04080000 and 17.01.2015.1228 OS driver not detected in previous versions.
- (Resolved) - SWRAID: Setting Controller time using storcli returns Failure
- (Resolved) - pd firmware download for >2mb images fails in linux.
- (Resolved) - Not detect SMART error again after disconnecting SMART occurred HDD once
- (Resolved) - SWRAID: Two messages in MSM for BGI resumed after reboot
- (Resolved) - Rebuild resume from the way after making force offline and online of source disk during rebuild
- (Resolved) - Rebuild started on PD log doesn't appear
Enhancement Requests:- (Closed) - Addressed the Bad Block Table Migration Issue in SWR from non 4K supported configs to 4K supported configs
CSET Activities:- (Port_Complete) - CSCuw39376: SWRAID: When a PR is aborted AEN displayed as PR complete
BaseCM Activities:- (Completed) - UndoActivityChangeSet: Subtractive merge of BaseCMActivity
- (Active) - 1.50 driver release checkins. ver: 17.01.2016.0108
- (Completed) - 1.50 SLES 11 sp4 patch release check in.
- (Completed) - 1.50 Window 10 release check in.
- (Completed) - UndoActivityChangeSet: Subtractive merge of BaseCMActivity
- (Completed) - SWR-1.50- 12192015 Driver version change
- (Active) - 1.50 driver release checkins
- (Completed) - SWR OS driver version 17.01.2016.0216
- (Completed) - 1.50 Linux patch release check in.
- (Completed) - SWR-1.50- 11182015 -Driver version change
- (Completed) - SWR-1.50- 12082015 Driver version change
This download is valid for the products listed below:- Intel Server Board S1200BTL
- Intel Server Board S2600GZ
- Intel Server Board S2600GL
- Intel Server Board S2600JF
- Intel Server Board S2600JFQ
- Intel Server Board S2600CP2
- Intel Server Board S2600CP4
- Intel Server Board S2600CO2
- Intel Server Board S2600CO4
- Intel Server Board S2600IP4
- Intel Server Board S1200KP
- Intel Server Board S2400SC2
- Intel Server Board S2400EP2
- Intel Server Board S2400EP4
- Intel Server Board S2400GP2
- Intel Server Board S2400GP4
- Intel Server Board S1400FP2
- Intel Server Board S1400SP2
- Intel Server Board S1400SP4
- Intel Server Board S2400LP
- Intel Server Board S2600WP
- Intel Server Board S2600WPQ
- Intel Server Board S2600COE
- Intel Server Board S2600JFF
- Intel Server Board S2600WPF
- Intel Server Board S1400FP4
- Intel Server Board S2600IP4L
- Intel Server Board S1200BTSR
- Intel Server Board S1200KPR
- Intel Server Board S1200BTLR
- Intel Server Board S1400FP2IOC
- Intel Server Board S1400FP4IOC
- Intel Server Board S1600JP2
- Intel Server Board S1600JP4
- Intel Server Board S1200BTLRM
- Intel Server Board S1200V3RPL
- Intel Server Board S1200V3RPS
- Intel Server Board S1200V3RPO
- Intel Server Board S1200V3RPM
- Intel Server Board S2600KP
- Intel Server Board S2600KPF
- Intel Server Board S2600TP
- Intel Server Board S2600TPF
- Intel Server Board S2600WT2
- Intel Server Board S2600WTT
- Intel Server Board S2600CW2
- Intel Server Board S2600CWT
- Intel Server Board S2600CW2S
- Intel Server Board S2600CWTS
- Intel Server Board S1200SPL
- Intel Server Board S1200SPO
- Intel Server Board S1200SPS
- Intel Server Board S2600CWTSR
- Intel Server Board S2600CWTR
- Intel Server Board S2600CW2SR
- Intel Server Board S2600CW2R
- Intel Server Board S2600KPR
- Intel Server Board S2600KPFR
- Intel Server Board S2600TPR
- Intel Server Board S2600TPFR
- Intel Server Board S2600KPT
- Intel Server Board S2600KPTR
The following procedure describes how to install Windows OS onto RAID logical disk:1. Copy the driver files to a removable media, such as USB flash drive, CD-ROM, or floppy disk
2. Create RAID logical disk(s) using ESRT2 OpROM Config Utility (during POST).
3. Boot Windows installation disk. Follow instructions on screen until below step is reached.
4. At "Which type of installation do you want?" screen, select "Custom (advanced)"
5. At "Where do you want to install Windows?" screen, select "Load Driver"
6. Install the removable media with the driver files (extracted in step 1)
7. Select "Browse" and locate the folder with the driver files and then select "OK"
8. Select "Next". There may be a 1-2 minute delay as drivers are loaded.
9. Select "Drive options (advanced)" to customize partitions - if necessary
10. Select "Next" to continue with the installation
11. There are several reboots during installation - ensure that the selected RAID array is the boot device during every reboot.
Installation of the driver after the operating system is installed:1. Boot into applicable Windows OS. Click the Windows Start button and select Settings.
2. Click Control Panel.
3. Select Adapter.
4. Select the Drivers tab.
5. Scroll down the list until the appropriate selection for your system which contains the Intel(r) Embedded RAID Technology II and for your operating system displays, then click <OK>.
6. Select it, then remove it by clicking the Remove button.
7. Click the Add button.
8. Select the Have Disk button.
9. Insert the diskette into the floppy drive.
10. Select drive letter A: and click on <OK>.
11. Select Intel(r) Embedded RAID Technology II and click OK.
12. After Windows copies the driver, reset the system.

Operating system:
OS Independent