Intel RSTe (RAID) Preinstall driver for Windows 7 - Intel drivers for Windows 7

Intel RSTe (RAID) Preinstall 3.6.0.1093

Download Mainboard Utilities drivers from Intel for Windows 7

Intel RSTe (RAID) Preinstall driver from Intel for Windows 2003 / Windows Vista / Windows XP X64 / Windows 2008 / Windows Vista64 / Windows 7 / Windows 7 x64 / Windows 8 / Windows 8 x64

Publisher review for Intel RSTe (RAID) Preinstall 3.6.0.1093:

Before install Intel RSTe (RAID) Preinstall 3.6.0.1093you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Intel RSTe (RAID) Preinstall. We recommend to always use most recent version of a driver.

Intel Rapid Storage Technology enterprise (Intel RSTe) is designed to provide functionality for the following Storage Controllers:

SCU Controllers:
- Intel C600 series chipset SAS RAID (SATA mode) Controller
- Intel C600 series chipset SAS RAID Controller

SATA RAID Controllers:
- Intel C600 series chipset SATA RAID Controller

SATA AHCI Controllers:
- Intel C600 series chipset SATA AHCI Controller

This driver supports RAID 0, 1, 5 and 10. The driver should be installed after the operating system has been installed. F6 and RAID BIOS configurations need to be performed prior to installation of this driver for proper operation.

Operating system installation RSTe F6 drivers for Windows 32 and 64-bit driver versions are included.

New Features Included in this Release
- Legacy OROM Boot Behind Expander Support
RSTe SCU Legacy OROM
RSTe DOS Based RIAD Configuration Utility
RSTe GUI
- RSTe Command Line Intrace Tool Supports Clearing RAID Metadata

Fixes:
- Manufacturer and model number may not match between RSTe GUI and RSTe System Report
- Potential data loss when using Solid State Drives (SSDs) that do not support Power Safe Write Cache
- System may not restart automatically when prompted after Installation
- RAID Volume may be degraded after an S3 resume
- The number of drives shown and the number of SATA ports reported in Intel RSTe GUI may not be consistent
- RSTe EFI Tools may not function properly in a Secure Boot environment
- RSTe Driver Copyright date may not be correct
- Attempting to migrate a RAID Volume may result in a system failure with the Error Code of 0xD1
- SCU RAID Volume may fail during a system restart
- RSTe GUI may report an "Unknown error" after deleting a volume following a ROHI Rebuild
- RSTe UI Copyright date may not be correct.
- Serial Number of SATA Disk connected to the SCU Controller may be reported incorrectly



Operating system:
Windows 2003 / Windows Vista / Windows XP X64 / Windows 2008 / Windows Vista64 / Windows 7 / Windows 7 x64 / Windows 8 / Windows 8 x64