MSI H61I-E35 V2/W8 Intel RST 10.5.0.1027

Download Mainboard Utilities drivers from Intel for Windows 7

MSI H61I-E35 V2/W8 Intel RST driver from Intel for Windows XP / Windows Vista / Windows XP X64 / Windows Vista64 / Windows 7 / Windows 7 x64

Developer:............ Intel
File size:.............. 11.9 KB
Downloads:......... 506
Release date:...... 15 May 2013
Last update:........ 15 May 2013

Download MSI H61I-E35 V2/W8 Intel RST 10.5.0.1027

Publisher review for MSI H61I-E35 V2/W8 Intel RST 10.5.0.1027:

Before install MSI H61I-E35 V2/W8 Intel RST 10.5.0.1027you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of MSI H61I-E35 V2/W8 Intel RST. We recommend to always use most recent version of a driver.

Fixes:
- If a reboot occurs during a migration and the data is in the migration copy area, the OROM will fail the volume
- Dirty shutdown after max acceleration and I/O causes data miscompare
- RST user interface does not display required data loss warning for existing data on SSD when enabling acceleration
- Copyright dates incorrect
- Smart Response Technology system boot failure (corrupted OS image) after unexpected power loss
- An unexpected error message shows in the user interface when system contains an accelerated volume with SSD space existing and another volume is attempted on the same array
- RST OROM User Interface incorrectly states data will be lost on Cache Disk in Reset to Non-RAID option
- CSMI DeviceIOControl call is returning an invalid value for SATA device position number
- 0x9F BSOD in S3 test with specific SSD
- RAIDCFG32 Accelerate disk mismarked as Unknown Disk when reinserted
- No memory dump file found after the 2nd time the system crashed with an accelerated OS disk
- ZPODD doesn't respond to GESN command
- WHQL: READ CAPACITY (16) Allocation Length Test assertion failure (WLK1.6 BLOCKING)
- WHQL: READ (6) Basic Verification Test assertion failure (WLK1.6 BLOCKING)
- WHQL: MODE SENSE (6) Ensuring mandatory mode pages are supported assertion failure (WLK1.6 BLOCKING)
- WHQL: MODE SENSE (6) Checking Informational Exception Mode Page assertion failure (WLK1.6 BLOCKING)
- WHQL: ASSERTION: READ CAPACITY (10) Negative Test assertion failure (WLK1.6 BLOCKING)
- Accelerate button shows in user interface when using Windows XP
- Certain ODDs sporadically disappear at power on
- 0xD1 BSOD when trying to manually eject powered down ODD
- System sporadically failed to resume from S4
- ZPODD slot drive device does not power after Idle time
- RST user interface does not allow creation of >2TB RAID 5 with array allocation of 50% when creating the volume from a disk
- Black screen or 0x9F BSOD sporadically encountered when running extended S3 cycles
- Hot plug insertion of locked disk hangs system
- Smart Response Technology fails performance criteria for PCMark Vantage: HDD Suite
- RAID 1 Volume on 2 disk matrix array initializes when disk is added to separate matrix array
- Reboot after accelerating >2TB boot volume fails with 0xc000000f error
- Bootable RAID 1 array Failed after BSOD
- Cannot disable acceleration after accelerating a RAID Volume in Enhanced mode
- RAID5:discrepancy between OROM and user interface on degraded RAID5 volume with locked disks
- RAID10:discrepancy between OROM and user interface on degraded RAID10 volume with locked disks
- System fails to resume from hibernate after syncing in the OROM



Operating system:
Windows XP / Windows Vista / Windows XP X64 / Windows Vista64 / Windows 7 / Windows 7 x64

Copyright (c) 2024 ++ win7dwnld.com - All rights reserved. - 0.0139 s