Samsung GX-20 Camera driver for Windows 7 - Samsung GX-20 Camera driver from Samsung for OS I

Samsung GX-20 Camera 1.01

Samsung GX-20 Camera driver from Samsung for OS Independent

Samsung GX-20 Camera driver from Samsung for OS Independent

Publisher review for Samsung GX-20 Camera 1.01:

Before install Samsung GX-20 Camera 1.01you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Samsung GX-20 Camera . We recommend to always use most recent version of a driver.

How to Upgrade the Firmware
Caution: If the batteries are completely discharged during the firmware upgrade, camera malfunction may occur. Make sure to use fully charged batteries for safety. Ensure that you format the SD card before using it, and then save the firmware file on the formatted SD card.
- Download the firmware file into the root directory of the SD memory card. Check that the firmware file name is fwgx20b.bin.
- Insert fully charged batteries into the camera.
Insert the SD card on which the firmware file is to be saved.
- Close the SD card cover of the camera.
- While pressing down the MENU button, turn the main switch ON.
- When the following symbol appears on the LCD monitor, select YES, and then press the OK button.
The firmware upgrade begins as in the picture below. It takes about 60 seconds.
Do not turn off the camera.
- When the firmware upgrade is successfully carried out, the message “COMPLETE” appears. Turn the main switch of the camera to OFF.
Added Functions in New Version
Firmware version 1.01 with added functions for the GX-20 has been released.  
- Details of added functions Minimized image noise when using 2 second self-timer.

Operating system:
OS Independent