Allen & Heath GLD-112 Digital Mixer driver for Windows 7 - Allen & Heath GLD-112 Digital Mixer driver from

Allen & Heath GLD-112 Digital Mixer 1.51

Allen & Heath GLD-112 Digital Mixer driver from for OS Independent

Allen & Heath GLD-112 Digital Mixer driver from for OS Independent

Publisher review for Allen & Heath GLD-112 Digital Mixer 1.51:

Before install Allen & Heath GLD-112 Digital Mixer 1.51you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Allen & Heath GLD-112 Digital Mixer . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Allen & Heath GLD-112 Digital Mixer Firmware 1.51.Improvements:- Time constants of the Automatic Mic Mixer have been updated to improve response for both D-Classic and NOM modes.
Fixed Issues:- Several minor fixes related to recall of compressor Libraries and settings.
Installation steps:1. Download the firmware
2. Remove any previous GLD Firmware from your USB key. Plug a USB key into your computer. If you have previous GLD firmware already on your key, look in its AllenHeathGLD folder and delete the existing Firmware directory and also the Firmware.md5 file in the AllenHeathGLD folder. Do not delete the other directories.
3. Open and extract the Zip file to your USB key. Open up the zip file you have just downloaded. Extract all files to the root directory of your USB key. Once the extraction is complete check that a new Firmware directory has appeared under the AllenHeathGLD folder on your USB key. You may need to refresh the AllenHeathGLD folder to see this.
Note: Do not change the folder name or browse inside the Firmware folder as doing this may cause firmware corruption. Attempting to navigate or open files within this directory may cause your Operating System to leave behind small temporary system files which can invalidate your firmware.
4. Safely remove the USB key from your computer. Click on the ‘safely remove hardware’ icon, in the bottom right of your screen to safely remove your USB key.
5. Plug the key into a USB port on the GLD. Plug your USB key into either one of the USB ports on the GLD. Go to the Setup / Utility / Firmware screen and touch Update. This will then detect your USB key and validate the firmware contents.
6. Perform the update. Touch the Update button. Do not interrupt this process. When the firmware has been successfully installed, touch the Reboot button. The GLD will reboot with the new firmware installed. Any AudioRacks currently connected or connected later to the GLD will have their firmware automatically updated by the GLD during the boot process.
7. Recall your settings. Recall a Template Show or the User Show you saved before the update to restore your settings.

Operating system:
OS Independent