Allen & Heath iLive-176 Digital Mixer driver for Windows 7 - Allen & Heath iLive-176 Digital Mixer driver from

Allen & Heath iLive-176 Digital Mixer 1.94

Allen & Heath iLive-176 Digital Mixer driver from for OS Independent

Allen & Heath iLive-176 Digital Mixer driver from for OS Independent

Publisher review for Allen & Heath iLive-176 Digital Mixer 1.94:

Before install Allen & Heath iLive-176 Digital Mixer 1.94you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Allen & Heath iLive-176 Digital Mixer . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Allen & Heath iLive-176 MixRack Firmware version 1.94.Fixes:This release fixes the following issue:
- Issue 594 – This issue was not completely fixed with previous release V1.93. Although the iLive lock up was fixed, surface control could still be briefly interrupted while the channel name messages were being delivered.
Installation steps:1. Download the firmware.
Notes. Save the zipped file to your Desktop or folder of your choice.
2. Extract the Firmware folder. Unzip the file. You should find a folder called Firmware inside the zip file. Included in the folder are the data files needed for the update, a text file which displays the version number, and two sub folders.
3. Copy the Firmware folder to your USB key. Delete or rename any existing Firmware folder on the USB key. Copy the Firmware folder to the root directory of the key. Do not change the older name. Now safely unplug your USB key by first clicking on the ‘Safely Remove Hardware’ icon on the task bar (Windows), or dragging it on to the ‘Eject’ icon in the dock (Mac).
4. Save your current iLive settings as a Show. Updating firmware restores the console parameters to factory default. Current settings are lost. If you want to keep your settings make sure you first archive them as a User Show. These are not overwritten by the update.
5. Plug the key into a Surface USB port. Go to the UTILITY / Firmware screen and touch Update Firmware. A green tick and the version number should be displayed indicating that firmware has been found on the key. Check for correct version number. Green ticks indicates units ready to be updated. A red cross indicates a unit that cannot be or is already updated.
6. Perform the update. Touch Perform Updates and confirm OK. It takes just over 1 minute for the update to install. Do not interrupt this process. When the ‘Updated Successfully’ window displays touch OK to restart the system. It can take up to 4 minutes to reboot the system for the first time after a firmware update. When complete, check that green ticks and the correct version number are displayed on the Status screen.
7. Recall your settings. Recall a Template Show or the User Show you saved before the update to restore your settings.
8. Download and install the latest version of iLive Editor software. The version of Editor software run must be compatible with the firmware version.

Operating system:
OS Independent