Allen & Heath ME-1 Personal Mixer driver for Windows 7 - Allen & Heath ME-1 Personal Mixer driver from fo

Allen & Heath ME-1 Personal Mixer 1.13

Allen & Heath ME-1 Personal Mixer driver from for OS Independent

Allen & Heath ME-1 Personal Mixer driver from for OS Independent

Publisher review for Allen & Heath ME-1 Personal Mixer 1.13:

Before install Allen & Heath ME-1 Personal Mixer 1.13you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Allen & Heath ME-1 Personal Mixer . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Allen & Heath Personal Mixer Firmware version 1.13.Fixes:- Keys assigned to Aux In may not always store / recall correctly in presets.
- In rare circumstances a hard reset could cause the ME-1 to stop passing audio.
- Editing the name of a USB preset could sometimes crash the ME-1.
- Several bugs related to Groups and stereo members.
- Keys set to Auto Assign mode could sometimes have their level, mute and pan reset after power up.
- Exporting a Config to USB and importing into another unit could sometimes corrupt the presets and result in unassigned keys.
- Storing many presets on a USB3.0 key could sometimes corrupt the USB data and crash the ME-1.
- Hot-plugging the dSNAKE input could sometimes reset the key assignments.
- The Aux Input left and right side were inverted.
- A key set to Auto Assign would cause the level and pan of the assigned channel to be reset if the key was reassigned to a specific source.Installation steps:1. Check the current version. Hold Shift and press the Group key to open the Setup Menu. Scroll and select About. The screen displays the firmware version currently loaded in the ME-1.
2. Download the firmware. This is a zip file with a name that includes the version number, for example: AllenHeathME1_V1.23-Rev12345.zip
3. Copy the new firmware to USB key. Unzip the downloaded file to your computer and then copy its ME1 folder to the root of your USB key. This will overwrite any previous version you may have on your key.
Note Unzip the downloaded file to your computer, not directly to the USB key. The ME1 folder has the following files:
- USB root
- ME1
- M0.pad 192KB
- M4.pad 128KB
- Version.txt 1KB
- Safely Remove/Eject the USB key from the computer.
4. Update the firmware.
- Plug the USB key into the ME-1 rear panel USB port.
- Hold Shift and press the Group key to open the Setup Menu. Scroll and select System Setup. Select the Firmware page. The screen displays the current firmware version and that found on the key.
- Press the Rotary to select the new firmware. Select Ok in the confirmation screen to start the update.
- The ME-1 reboots with the new firmware loaded in a few seconds

Operating system:
OS Independent