Canon EOS C300 Mark II Camera driver for Windows 7 - Canon EOS C300 Mark II Camera driver from CANON f

Canon EOS C300 Mark II Camera 1.0.3.1.00

Canon EOS C300 Mark II Camera driver from CANON for OS Independent

Canon EOS C300 Mark II Camera driver from CANON for OS Independent

Publisher review for Canon EOS C300 Mark II Camera 1.0.3.1.00:

Before install Canon EOS C300 Mark II Camera 1.0.3.1.00you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Canon EOS C300 Mark II Camera . We recommend to always use most recent version of a driver.

Firmware Version 1.0.3.1.00 incorporates the following update: - Supports EF-S 18-135mm f/3.5-5.6 IS USM, an EF lens to be released in late March, 2016. (Please note that the EF-S 18-135mm f/3.5-5.6 IS USM lens does not function with previous firmware versions for the EOS C300 Mark II/EOS C300 Mark II PL.)
Caution: - There is no firmware update for other Cinema EOS products (C500/C300/C100 Mark II/C100) they can be used with the above lens without any problems.
- You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 64MB or more for the firmware update.
IMPORTANT: Precautions for updating the firmware - If the firmware update is not performed correctly, the camera may stop working.
- All camera settings will be reset formatted when you perform the firmware update.
- It is not possible to revert the firmware back to a previous version after you have performed the firmware update.
- Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source during the firmware update. Doing so may cause the camera to malfunction.
Installation Instructions: - Save and unzip the downloadable archive.
- Insert the SD card into the camera’s SD card slot, and close the card cover.
- Slide the Power switch to CAMERA.
- After pressing the MENU button, open the [Initialize Media] submenu.
- Select [SD Card] and then press SET.
- Select [Complete] (complete initialization) and then press SET.
- When you select [OK] and then press SET, complete initialization of the SD card will start.
- When the confirmation message appears, press SET.
- Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
- Copy the firmware update data to the SD card
- Insert the SD card prepared into the camera’s SD card slot.
- Slide the Power switch to CAMERA.
- After pressing the MENU button, open the camera firmware submenu.
- [System Setup] [Firmware] [Camera]
- The firmware update confirmation screen will be displayed.
- When you select [OK], the firmware update will start.
- After the update ends, the camera will restart automatically, and a firmware update completion screen will be displayed.
- When you select OK, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.
- Check that the firmware version has changed to current one.
- Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.

Operating system:
OS Independent