Extron FOX T USW 103 Fiber Optic Transmitter 1.09

Extron FOX T USW 103 Fiber Optic Transmitter driver from Extron for OS Independent

Extron FOX T USW 103 Fiber Optic Transmitter driver from Extron for OS Independent

Developer:............ Extron
File size:.............. 3.7 KB
Downloads:......... 554
Release date:...... 24 Apr 2016
Last update:........ 24 Apr 2016

Download Extron FOX T USW 103 Fiber Optic Transmitter  1.09

Publisher review for Extron FOX T USW 103 Fiber Optic Transmitter 1.09:

Before install Extron FOX T USW 103 Fiber Optic Transmitter 1.09you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron FOX T USW 103 Fiber Optic Transmitter . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron FOX T USW 103 Fiber Optic Transmitter Firmware version 1.09.Fixes:- Fixed the difference in white balance levels on analog input issue: Made changes to the calibration default values on the Analog input to match the levels of FOXBOX VGA TX.
- Improved Feature: Auto Output Format removes limited quantization option. When set for “Auto” Output Video Format, the unit used limited quantization range for SMPTE resolutions. To expand the compatibility with a wider range of sink devices, the “Auto” mode now outputs DVI to DVI sink devices, and HDMI RGB 444 Full Quantization to HDMI sink devices, regardless of the set output resolution.
- Fixed issue with HDCP Authorized: When HDCP Authorized was disabled, the setting reverted back to the default value (HDCP Authorized ON) when the transmitter was power cycled. HDCP Authorized now maintains its value when the transmitter is power cycled.
- Added New Rate: Added 1600x900 @ 60 Hz RGBHV to the input table. 1600x900 @ 60 Hz is now automatically detected and set up on the analog inputs. This rate continues to be accepted on HDMI inputs.
- Fixed Embedded Audio issue: The FOX T USW 103 was unable to transmit embedded audio when connected to a FOXBOX RX HDMI using Extron HDMI-PC EDID with 2-CH audio files. The EDID specified 44.1 KHz audio sampling. The EDID now specifies 48 KHz audio sampling.
Installation steps:1. Open Firmware Loader to establish a connection between the computer and the device. The Add Device... dialog box opens.
2. Select FOX T USW 103 from the Device Name drop-down list.
3. Select the method of connection from the Connection Method drop-down list.
4. Depending on the connection method, additional options appear. Make the appropriate selections for the current connection method.
5. Click Connect.
6. Click Browse in the New File Firmware (Optional) panel. The Open window opens.
7. In the Open window, navigate to the new firmware file, which has an .S19 extension, and click Open.
8. Click Add. The Add Device... dialog box closes and the device and firmware are listed in the Firmware Loader main window.
9. Click Begin to start the upload process.
10. Close Firmware Loader when the Remaining Time field shows 00.00.00 , the Progress column shows 100% , and the Status field shows completed.
ATTENTION:- Valid firmware files must have the file extension .S19. A file with any other extension is not a firmware upgrade for this device and could cause the device to stop functioning.

Operating system:
OS Independent

Rate this software
Error connecting to mysql