Sealife DC310 Camera driver for Windows 7 - Sealife DC310 Camera driver from for OS Independ

Sealife DC310 Camera for OS Independent

Sealife DC310 Camera driver from for OS Independent

Sealife DC310 Camera driver from for OS Independent

Publisher review for Sealife DC310 Camera for OS Independent:

Before install Sealife DC310 Camera for OS Independentyou should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Sealife DC310 Camera . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Sealife DC310 Camera Firmware.Installation steps:1. Insert SD card into camera, turn camera power ON and connect camera to computer USB. Do not use battery power during firmware uploading – only use the DC250/DC300/DC310 3.3volt AC power adapter (item #SL932).
2. Download the firmware file.
3. Locate firmware file named ‘3000APP.bin’. Copy the ‘3000APP.bin’ file and paste into ‘Removable Disk”. Make sure to past the file into the root directory folder titled “Rremovable Disk” and not one of the folders under the root directory. The SD card now has the new firmware on it.
4. Disconnect camera from computer and turn camera OFF.
5. With SD card inserted in camera, set mode dial to ‘Record’ mode, open lens cover and turn camera ON. The camera-ready light will flash and you will here some beeps. The LCD monitor will NOT display messages during the firmware uploading process. When the camera ready light turns off and there is one final beep sound, which indicates that the uploading process is complete. The new firmware is now uploaded on the camera.
6. Disconnect power and remove SD card from camera. To update firmware for more than one camera, insert the SD card into other camera(s) and repeat step 4.
7. With SD card removed from camera, turn camera power ON. Insert SD card into camera while camera power is ON.
8. Select “format media” and reformat CF. This will delete the “3000APP.bin” file from the SD card. It will also delete any other items stored on the SD memory card.
Important notice:- Some SD cards brands will not work for this procedure. If the camera does not behave as described in step 4, repeat all steps using a different brand/type of SD card.
- If you have a SD card reader/writer follow the above instructions # 2, 4, 5, 6 and 7.
- Do not use the DC200 or DC100 AC power adapter or it will damage the camera.

Operating system:
OS Independent