SmallHD AC7 OLED/OLED-SDI Field Monitor driver for Windows 7 - SmallHD AC7 OLED/OLED-SDI Field Monitor driver fr

SmallHD AC7 OLED/OLED-SDI Field Monitor 4.0.2

SmallHD AC7 OLED/OLED-SDI Field Monitor driver from for OS Independent

SmallHD AC7 OLED/OLED-SDI Field Monitor driver from for OS Independent

Publisher review for SmallHD AC7 OLED/OLED-SDI Field Monitor 4.0.2:

Before install SmallHD AC7 OLED/OLED-SDI Field Monitor 4.0.2you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of SmallHD AC7 OLED/OLED-SDI Field Monitor . We recommend to always use most recent version of a driver.

Fixes:
- Sharpness control now functioning properly
- RGB color controls now save when rebooting
- Changing presets no longer causes menu to open
- False color accuracy improved 
- More accurate auto-scaling
- Preset functionality improved
- Other minor bug fixes Installation steps:1. Insert FAT or FAT32 formatted USB drive into your PC or Mac.
2. Remove/Delete any existing .bin file.
3. Download the desired Firmware version from the list above.
4. Copy the *.bin file to the USB drive. The file must NOT be in a folder.
5. Safely eject the USB drive from the PC/Mac.
6. Power Off the AC7.
7. Insert the USB drive into the USB adapter cable that was included with your AC7.
8. Plug the USB cable into the AC7 Mini-USB port.
9. While pressing down on the AC7 scroll wheel, Power ON the AC7.
10. Once white text appears on the black screen, you may stop pressing the thumb wheel. If the AC7 gets stuck during the "Verification" process for more than 4 minutes, the update has successfully completed and you may proceed to the next step.
11. When prompted, switch the AC7 OFF, remove the USB cable, and then Power On the AC7.
12. Reset the monitor to factory defaults: Select MENU > SYSTEM > FACTORY RESET
Important notice:- Be careful NOT to lose power during the update process. We recommend you use the AC adapter or a fully charged battery. If the AC7 powers OFF during the software update BEFORE the VERIFY begins, you will have a blank monitor. You should be able to restore everything by successfully completing the Firmware Update. However, should your monitor need to be sent back for repair, associated shipping and repair costs are not covered by the AC7's warranty.
- It is recommended that you use a drive that is 2GB or less and formatted FAT or FAT32.
- The drive should ONLY contain only ONE *.bin file. ALWAYS delete the old *.bin from the USB drive before making the next update. You may have other files on the drive, but only one *.bin file.
- To View Installed Firmware Version: MENU > MISC > VERSION

Operating system:
OS Independent